Hey Y'All,

After getting some parts ready for the Powder Coater, I didn't get much else "significant" done on my build this weekend

"Slow-n-steady" progress being made, though. This post shows some miscellaneous upholstery prep that most of you have done...

First up: adding self-adhesive thermal padding to my drop trunk

installed drop trunk thermal pads.jpg

Then, I focused on the trans tunnel top panel...with top and bottom prepped

Bottom-side got an aluminized fiberglass self-adhesive pad

installed trans tunnel top panel thermal pad.jpg

Top-side got a self-adhesive 1/8" thick closed-cell foam pad

installed trans tunnel top panel foam pad2.jpg

and lastly, I ran out of time, but did manage to start on a template for the upper trunk floor

making template for upper trunk floor thermal pad.jpg

I'm hoping I can use this for both the thermal pad and the carpeting

Until next time, Happy Building!

Craig C