MK4 Roaster - Rear Sway Bar

[Puckboy]

Hello,

Dose anyone know what hole (there are 4) I should use on the sway bar the manual shows a different one!
Also if anyone know the difference between the holes i.e. softer at the end or max stiffness in case i need to adjust it later !

Mike

[Jeff Kleiner]

The holes closer to the pivot point (inner) are stiffest and the ones farther from the pivot (outer are softest).

Jeff

[Puckboy]

Thanks Jeff, I ended up opting for the second hole so in the middle I guess