Raptor Bed Liner on a MK4 Roadster

[Robk]

I'm getting ready to coat the underside of my MK4 body with U-Pol Raptor bedliner. I've scuffed the fiberglass with 120 grit, and I'll clean it all good with acetone. Is that sufficient? The U-Pol website seems to indicate it is. They only mention the "adhesion promoter" for hard to sand places. Have any of you found the adhesion promoter is necessary?

[Jeff Kleiner]

You’re good. Go ahead and shoot it!

Jeff

[Rebostar]

Ditto what Jeff said. When I did mine I just used red scotch bright and cleaned with acetone. I used the tintable version tinted with grey primer.

DSC03559.JPGDSC03560.JPGDSC03561.JPG

[MakoGT350]

Looks like it comes in kits of 4 or 8 quarts, is the 4 enough?

[Jeff Kleiner]

The gallon kit (which includes a Schutz gun) will do the entire underside of the body and allow you to spray a second coat in the areas above the wheels plus do the tire side of the splash panels.

Jeff

[Robk]

Looks good. I'm using the roll on version and sticking with the black.

[MakoGT350]

The gallon kit (which includes a Schutz gun) will do the entire underside of the body and allow you to spray a second coat in the areas above the wheels plus do the tire side of the splash panels.

Jeff

Thank you Jeff - much appreciated!