Two new updates.

1) I did a color test of the Chrysler F-8 Green. This was factory color in a spray can with 2k clear, also a spray can, there is some orange peel but I didn't cut it or anything.
Color test.jpgColor test 2.jpg
This is the back side of the truck bed front panel. I am not going to paint this myself, I just wanted to see the color on a panel.

2) I drew up and cut the dash for the A/C controls. I will have a GPS screen below the dash in the center area, so that was unavailable. I also did not want anything hanging down into either of the foot box areas. So this was the selected location.
Dash AC cut out 1.jpg
Dash AC cut out 2.jpg
Dash AC cut out 3.jpg
I added fiberglass filler to the back side of the dash, just to ensure there was enough materiel there because I was cutting into the lip of the detail (bead roll) of the dash, then I simply fit the control panel.