Street Rod Jim's 33 Hot Rod V2 #1143 Build - The Journey Begins

[Street Rod Jim]

Today I am getting the heater control valve, radiator hose and Air intake put together.

[Street Rod Jim]

Mounting the dash on the 33 Hot Rod without screws showing.

[Street Rod Jim]

Adding the Lokar Shifter and Oil Dip Stick on the 33 Hot Rod V2.

[Street Rod Jim]

Adding the rear exhaust and trunk panel of the 33 Hot Rod V2.

[Street Rod Jim]

Factory Five 33 Hot Rod V2 - Kit Car Talk with Street Rod Jim 3

[Street Rod Jim]

Today I am adding in a rear harness safety bracket.

[Street Rod Jim]

Adding gauges and switches to the dash and center console.

[Street Rod Jim]

Today I am wiring up the gauges and reworking the looms.

[Street Rod Jim]

I found a great tool to flare brake lines perfectly.

[Street Rod Jim]

Today I am installing the electrical components of the car.

[Street Rod Jim]

Testing the electronics of the 33 Hot Rod V2.

[Street Rod Jim]

Tweaking in the Holley Terminator X Max for the LS engine and 4L65e transmission.

[Street Rod Jim]

Prepping the 33 Hot Rod for first engine start. Lots of odds and ends.

[Street Rod Jim]

Street Rod Jim's 33 Hot Rod V2 Engine Start!

[Street Rod Jim]

Today I am working out the kinks noticed after the first engine start.

[Street Rod Jim]

Today I am adding a LS Steam Vent Hose to the engine.

[Salty Chief 35]

Congrats on getting it running, sounds awesome! Thanks for these videos, really put into reality what it takes to build these cars.
Jeremie

[Street Rod Jim]

Congrats on getting it running, sounds awesome! Thanks for these videos, really put into reality what it takes to build these cars.
Jeremie

Thanks Jeremie I appreciate it.

[Street Rod Jim]

Bleeding brakes with a pressurized system. The best I have used.

[Street Rod Jim]

33 Hot Rod headlights.

[Street Rod Jim]

First drive in my 33 Hot Rod V2

[Street Rod Jim]

Kit Car Talk with Street Rod Jim #4 - The trials and tribulations of building a car

[Street Rod Jim]

Outgassing issues with my 33 Hot Rod V2

[Street Rod Jim]

More information on getting my EFI system up and running.

[Street Rod Jim]

Working out the kinks of the EFI system.

[Salty Chief 35]

Well done Jim, glad you kept with it and got some of the issues that you were having sorted. You are that much closer to having one bad a$$ ride!
Respectfully
Jeremie

[Street Rod Jim]

Well done Jim, glad you kept with it and got some of the issues that you were having sorted. You are that much closer to having one bad a$$ ride!
Respectfully
Jeremie

Thanks Jeremie!

[Street Rod Jim]

Using an electronic actuator for my emergency brakes.

[Street Rod Jim]

Taking my 33 to get a VIN number

[Street Rod Jim]

Calibrating the Autometer Speedometer

[Street Rod Jim]

First trip to the gas station and updates

[FF33rod]

removed due to lack of interest

[Street Rod Jim]

Getting the car road worthy - biasing brakes.

[Salty Chief 35]

So your neighbors a #^+*. Glad the cop was annoyed as you were and didn’t give you a ticket. Car seems to be close now, looks good.
Respectfully
Jeremie

[Street Rod Jim]

Adding aftermarket side view mirrors to my 33 Hot Rod V2

[Street Rod Jim]

Getting the Holly Terminator X system tuned on the street.

[Street Rod Jim]

Adding wheels spacers to my front wheels to help with bike fender clearance issue on my 33 Hot Rod V2

[Street Rod Jim]

Changing the front bike fender clearance on my 33 Hot Rod V2

[Street Rod Jim]

Computer issues....Holley Terminator X

[Street Rod Jim]

Finalizing the Hood, Side Panels and Valance of the 33 Hot Rod V2 - Part 1