Infinitybox

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 1 of 1

Thread: Whibty | Pushrod | Master Cylinder | Videos

  1. #1
    Senior Member
    Join Date
    Aug 2020
    Posts
    156
    Post Thanks / Like

    Whibty | Pushrod | Master Cylinder | Videos

    All,
    Whibty sent a new master cylinder... Installed same exact problem...foot goes all the way to the floor.

    I took two videos prior to installing the new master cylinder.

    1) Should the Pushrod be able to be pull out like the video shows?

    2) Should the hole be closed in the rear master cylinder prior to engaging the pushrod? You can see the hole is not closed, but on the front cylinder, the hole is closed until the pushrod engages the cylinder

    https://www.mattmaresch.com/Private-...aster-Cylinder

    Thanks
    Last edited by Padawan; 05-05-2021 at 10:44 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

FFMetal

Visit our community sponsor