Scorpion Roller Rockers 1.6 | 302 | Value Covers Fit?

[Padawan]

All,
Stock 302, AFR 165 Heads

What valve covers fit over Scorpion Roller 1.6 Rockers?

Rocker Arms, Stud Mount, Full Roller, Aluminum, 1.6 Ratio, 7/16 in. Stud, Ford, Small Block

Prefer the Power by Ford look

Thanks,
Matt

[GWL]

Start with a search like: tall ford racing valve covers for 302

This is the page I came up with: https://www.google.com/search?rlz=1C...4dUDCA0&uact=5

Realize that your type of intake will matter too. Some tall valve covers will interfere with the stock Ford EFI intake. If you have a carb or carb like EFI it should not matter how tall they are.

George

[mburger]

Just one source of 100s like George posted.

http://store.cobranda.com/28vaco.html

[Sdonnel]

I used the standard cobra valve covers with the comp roller rockers. I also installed a 1/2" spacer under the valve cover. Just make sure you tighten them down and recheck them after a few heat cycles. I had no issues.

Scott