FormaCars

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Front UCA - MK4

  1. 07-28-2011, 06:19 PM #1
    Scott7644
    Scott7644 is offline
    68 Stang
    Join Date
    Apr 2011
    Location
    Indiana - for now.
    Posts
    69
    Post Thanks / Like

    Front UCA - MK4

    The manual shows that I should have 4 flanged bolts and nuts to mount the UCA's. The parts list only shows 2. I only received 2 bolts and nuts in my kit. I don't have any other extra bolts in the kit to mount the UCA's.

    Is the parts list wrong? Should it show 4 bolts and nuts? Should I have received 4 in the kit?

    Scott
    Reply With Quote Reply With Quote
  2. 07-29-2011, 10:09 AM #2
    Rick Masters
    Rick Masters is offline
    Tech Support, FFR
    Join Date
    Feb 2011
    Posts
    47
    Post Thanks / Like
    Scott,
    The MK4 upper arm location changed you should have two non flanged bolts that were packed with the spindles.
    Rick@factoryfive
    Reply With Quote Reply With Quote
  3. 07-29-2011, 11:52 AM #3
    Scott7644
    Scott7644 is offline
    68 Stang
    Join Date
    Apr 2011
    Location
    Indiana - for now.
    Posts
    69
    Post Thanks / Like
    Thank you Rick. Since my LCA's and spindle hub nuts are on backorder, I didn't open the spindle box yet.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

FFMetal

Visit our community sponsor