Shift lever threading

[billjr212]

Ok, I tried to do a quick search, but after looking at the massive number of results, I realized the search terms on this one might just be way too vague.

Is the threading on the shifter the same as the donor Subaru's? I'm thinking about picking up a Cobb shift knob for my daily driver WRX and thought it might be fun to go ahead and get one that matches in the 818...only problem being that my kit doesn't arrive until September.

For reference, I believe the thread on the stock Subaru shifter is 12 x 1.25.

Thanks!

[Mechie3]

Its the same. I used the same knob on my 02 WRX and my 818.

[AZPete]

Anyone know the thread on the K-Tuned shift lever? Wayne?

[D Clary]

Ktuned is different, I don't remember the thread but it is smaller, I made a threaded bushing to adapt the FFR knob

[FFRSpec72]

Ktuned is different, I don't remember the thread but it is smaller, I made a threaded bushing to adapt the FFR knob

I thought it was M10 x 1.5

[bompus]

The knob K-tuned sells is M10x1.5 , so I'm assuming that is what their shifter uses.

[billjr212]

Confirmed the thread on the stock FFR shifter is M12 x 1.25 just for the record since this thread has been revived.