Quote Originally Posted by JohnK View Post
I initially picked up this one to dial in my bell housing. It was a POS and caused me immense frustration.

https://www.amazon.com/dp/B002YPHT76...d_asin_title_6

I then tossed that one in the garbage where it belonged, and picked up this one which, while still not an "expensive" instrument, was massively better than the previous one.

https://www.amazon.com/dp/B001C0ZOPS...n_title_5&th=1
I am curious what you used for a base? I found getting it positioned and secured on the end of the crank was the most difficult part of the operation and I went through two trying to find one that wasn't designed by the Frustrated and Worthless Engineering dept.