[QUOTE=wedel456;578019]
Quote Originally Posted by Namrups View Post
I have a Ford Performance 460. Also based on the 351W block. It has the height issue. I was unable to use the oval air cleaner. I had to use a drop base round air cleaner with a tappered spacer under the Sniper 1 unit. I also had to remove some of the cross brace on the hood to get everything to clear. I used the FF supplied engine mounts and my pan is above the frame member by 3/8".

You are what got me looking at drop base. Thanks for your build thread!
Glad you found it useful!!
This is the drop base I used.