Chris' Coupe Build #566 - Rear Camera. EPBs. Hatch floor.

[460.465USMC]

Index (my memory jogger for what I did and why )

• Kit Build Sheet
• Garage Prep
• Wilwood Superlite v. Dynapro
• Delivery and Inventory
• IFS and Steering Rack (with Breeze offset bushings)
• Front Brakes (spindle clearance) and IRS Started
• IRS Complete
• Roller! Wheels and Tires
• Power Steering "Safety Loop"
• Coyote Gen 4X in the Garage! (header bolt pattern and oil pickup changes)
• DIY SS Tubing Straightener Fail
• Fuel Filter, Tank, Pump, and Hangar. Differential Vent.
• Wilwood Pedals, Engine Bay Panels (Custom Panels). Pressure Regulator.
• Rear Hatch Floor and Trunk Box (Part 1)
• Trunk Box (Part 2); Cockpit Panels (scroll down).
• Radiator/Panels, Radiator, and Breeze Shroud
• Brake and Clutch Reservoirs Install
• Coyote Gen 4 Oil Pan, Pickup, PS, and Clock
• Ni-Copp Brake Lines (Scroll)
• Flexible Fuel Lines
• Coyote DBW Mod for Russ Thompson Pedal Pad
• HVAC Evaporator, Compressor, and Control Valve
• NRG Quick Release and AGM Battery
• Final Panels Install - Part 1
• Final Panels Install - Part 2 (heat/sound insulation)
• Bleeding the brakes and rear hatch panel progress
• Transmission Install - Part 1
• Indexing the Bellhousing
• Transmission Install - Part 2
• Moroso Coolant Reservoir - Mounting System
• PCM Location. Deal Pedal. RF Fuse Panel.
• Main Power. Master Cutoff. Coyote PCM Harness Dieting.
• Dash Extension (and a Big Mistake!)
• Dash Mock-up
• FB Carpet and Wolo Bad Boy Horn
• Rearview Camera/Mirror and Overhead Courtesy Lights
• Wiper Motor. Evaporator and Heater Valve. Sending Harness.
• Front Harness and Fan Circuit
• Rear Harness with extras
• Rear Camera. EPBs tested. Hatch floor.