Just wondering if anyone else has had this same 'cosmetic' problem. The Coyote Fitment instructions are simple enough: locate the fuse panel mounting bracket with the logo, and mount to the passenger side footbox:

Screenshot 2022-05-23 123438.pngScreenshot 2022-05-23 123513.pngScreenshot 2022-05-23 123525.png

The problem? This is what I received in my kit:

20220523_123050.jpg

Was this just a bending error with the bracket (i.e. bent it the wrong way), so now the logo is backwards? Or, did they intend that the bracket be turned 180° so that the panel mounts further back, like this?:

20220523_124136.jpg

I have a heater at the firewall so I can only get the box so close. Don't want to start drilling until I know the harness will reach all the right spots.

Thanks,

32J