Window Frame - Gap

[Padawan]

On the Driver’s Side the Frame will not align up flush with the window. Since the frame is not flush I’m not able to screw in the top screw of the frame or close the gap.

Even holding the driver side window mount without any screws not able to get the frame to be flush with mount.

Please refer to the attached pictures for reference.

Driver side Pictures:

window 4.jpgwindow 3.jpgwindow 1.jpg

Passenger side

window 2.jpg

Can I move the brass insert?

Let me know if you have any additional questions.
Have an amazing day!



Side note - Thread your frame holes, way easier to line up window angle