All,
I have a 302 and bought:
• 16758 - Headers: 302 stainless steel 4-port (replace OEM Mustang headers & J-pipes) and
• 14932 - Upgrade: Polished Stainless Side Exhaust (standard kit comes with bare steel pipes

I followed the build video instructions and removed the following material for the side exhaust:
https://www.youtube.com/watch?v=Ok9W...6XeP8w&index=2
4:48 minute mark

On the Passenger side there is about one inch gap from the Headers and the Side Exhaust (body mounted w/sides pushed in) – Driver side is fine
• Top of Header Flange on passenger side 2 inches higher from the floor than the driver side

On the Passenger side it appears there is approx. 1 of inch of space between the side exhaust and headers

Does anyone have any thoughts on how you connect the passenger side Headers to the Side Exhaust?

Thanks in Advance!!!