Infinitybox

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  12
Results 1 to 19 of 19

Thread: mounted upper steering shaft, now the lower shaft is too low...ugh

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-04-2021, 11:01 PM #1
    toadster
    toadster is offline
    25th Anniversary #9772 toadster's Avatar
    Join Date
    May 2011
    Location
    Folsom, CA
    Posts
    1,936
    Post Thanks / Like

    Question mounted upper steering shaft, now the lower shaft is too low...ugh

    so I mounted my russ thompson turn signal, and figured I should just mount the steering shaft while I have it all lined up...

    IMG_2220.jpg

    <- footbox | toward front of car ->

    as I whacked the upper shaft into the lower one, I guess the screw didn't hold and the whole unit slid down into the upper knuckle just passed the bushing in the footwell..
    assume I have to disassemble the footwell section and steering wheel mount to undo this? it took a while of strong hits with a hammer to get the shafts in the proper orientation of the upper shim just hidden away...

    any other ideas before I unbuild/move/rebuild?
    Last edited by toadster; 03-04-2021 at 11:10 PM.
    Todd
    25th Anniversary MkIV | #20 of 25 | Build #9772
    https://cobradreams.com/ <- my build!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

FFMetal

Visit our community sponsor