I'm eyeballing my Jamar triple reservoir mount

some things I've learned from reading on here

  1. don't mount beyond 19" back from the radiator bar
  2. mount the reservoirs above the inlets of the intake for the master cylinder (not sure if applicable for PB?)
  3. mount with the lids below the rail
  4. make it re-movable because it will need to move to drop in the Coyote
  5. the reservoirs should be level, not mounted at a tilt to keep levels equal


I made a simple bracket with 2" aluminum
5kMLmdQ.jpg

OXJfpoP.jpg

Just mocking up, not to height - to get an idea of placement

Sseeo14.jpg 0366Td9.jpg i0WykNP.jpg

I plan on attaching another piece of aluminum to the existing bracket and fasten with 3/16" rivets - this should pull the unit out another 1/8" from the rail
the interference with the power unit is my biggest issue, running lines from the reservoirs to the master cylinder will take a loop for sure

thoughts? ideas? photos?