I installed the rear end using the lower bolt holes for the upper and lower control arms as suggested by the manual.

After the installation was complete I noticed the pinion flange on the differential was lined up such that it appears the driveshaft would hit the frame.

I am wondering once i set it on the ground on wheels will the flange align properly with the opening in the frame or should a move the control arms to the upper bolt holes on the frame to lift the rear end.

IMG_0196.jpgIMG_0197.jpgIMG_0198.jpgIMG_0199.jpgIMG_0200.jpgIMG_0201.jpgIMG_0202.jpgIMG_0203.jpgIMG_0204.jpgIMG_0205.jpg