Hi, I am warming up a relatively fresh '93 5.0 that is in my MKIII.
I was wondering if I could get any input on the combination I have (I am aware that the intake is not the "best flowing", but this is a MUST on my engine).
*Bottom end is all stock. (appx. 10,000 miles)
New parts as follows:
*AFR 1472 heads w/ Ford Racing 1.6 rollers
*Comp Cams double roller chain
*Ford Racing M-6500-R302H lifters/ Comp Cams 7826-16 push rods (correct length/ verified)
*Anderson Racing N41 cam
*Ford Racing 24# injectors ( bought Walbro 190LPH fuel pump too)
*PRO-M 75MM MAF
*BBK 70MM throttle body
*Ford Racing '93 Cobra upper and lower intake

Car has 3.73 gears

I have the original computer out of the '93 Mustang that my engine originally came from in the car. (5.0 H/O & 5-speed)

I am in the process of putting this together and would appreciate insights any of the Forum members might have for me on this.
Thanks for reading my post!

James