Street Rod Jim's 33 Hot Rod V2 #1143 Build - The Journey Begins

Finalizing the Hood, Side Panels and Valance of the 33 Hot Rod V2 - Part 2

https://www.youtube.com/watch?v=zkX7Nlp5fa8

Finalizing the Hood, Side Panels and Valance of the 33 Hot Rod V2 - Part 3

https://www.youtube.com/watch?v=qzeqOi38es0

Finalizing the Hood, Side Panels and Valance of the 33 Hot Rod V2 - Part 4

https://www.youtube.com/watch?v=fCBHudQwaNw

Nice work Jim. Watch all your videos.

Quote:

---

Originally Posted by Oldguy33

Nice work Jim. Watch all your videos.

---

Thanks!

We're waiting for delivery, delayed by the snow storm. What did you use for removing the tape residue on the body?

Quote:

---

Originally Posted by andyw

We're waiting for delivery, delayed by the snow storm. What did you use for removing the tape residue on the body?

---

Buy a gallon of acetone and a bunch of rags and microfiber cloth’s. A spray bottle for the acetone will help too. Be careful of the fumes, but you’ll use a lot for cleaning stuff. Buy boxes of gloves as well.

Lacquer Thinner is another good way to go, less aggressive than the acetone....

Steve

Quote:

---

Originally Posted by andyw

We're waiting for delivery, delayed by the snow storm. What did you use for removing the tape residue on the body?

---

I used acetone, but Lacquer thinner I think works better.

Finalizing the Hood, Side Panels and Valance of the 33 Hot Rod V2 - Part 45



https://www.youtube.com/watch?v=LdUEiLHGjv4

Fixing the curvature of the 33 Hot Rod Trunk


https://www.youtube.com/watch?v=-gV4WJWg-LM&t=518s

Sanding the gel coat - Preparing for paint


https://www.youtube.com/watch?v=14RlmiTeZQA

Sanding the gel coat - Preparing for paint Part 2


https://www.youtube.com/watch?v=UWZVITvjglw

Adding after market inserts to form the curvature of the 33 Hot Rod Trunk


https://www.youtube.com/watch?v=Dwpbkz9zHT0

Adding after market inserts to form the curvature of the 33 Hot Rod Trunk Part 2



https://www.youtube.com/watch?v=O2QJyx8RiTE

Adding after market inserts to form the curvature of the 33 Hot Rod Trunk Part 3



https://www.youtube.com/watch?v=C0VLyIqqSlE

Trimming and sanding the front side panels (Engine Covers) of the 33 Hot Rod V2


https://www.youtube.com/watch?v=PwA_mrXPs9w&t=1s

Extending fiberglass on the lower valance of the 33 Hot Rod V2


https://www.youtube.com/watch?v=RqPPL2YCNzQ&t=1s

Installing the two piece valance of the 33 Hot Rod V2


https://www.youtube.com/watch?v=btnT03crVdQ&t=1s

Jim gets an body work evaluation from his mentor Greg


https://www.youtube.com/watch?v=R-YkuUbfko8

Jim works out all the nuances of the hard top and gets it ready for the real body work.


https://www.youtube.com/watch?v=EtvyixrBeOM&t=1s

Starting the process of build primer and sanding.


https://www.youtube.com/watch?v=2xEA7G4v4P8

Getting the hood to align on my 33 Hot Rod V2


https://www.youtube.com/watch?v=jRn9ZhwNsYc

Installing the 818 trunk latch on a 33 hot rod.


https://www.youtube.com/watch?v=0FOebj1zWAw&t=2s

Still working on build primer to get to that car show finish


https://www.youtube.com/watch?v=rbhffNl35_I

I am shocked but still getting the waves out with more build primer.


https://www.youtube.com/watch?v=mWXQLcZHKcQ&t=475s

Aligning the doors one last time


https://www.youtube.com/watch?v=ePjCD6gbLBs

Finalizing the build primer on the rear fenders


https://www.youtube.com/watch?v=oVvWcB26fe8

Hang in there Jim. You’re making steady progress. Really enjoy your videos.
Respectfully
Jeremie

Hey Jim,

Looking over your prime videos and I noticed that It looks like your not using guide coat before you do any sanding?

If I missed it I apologize, but if your not using a guide coat I strongly suggest that you incorporate it into your paint prep process, especially before you start in on the hood.

Ron

Quote:

---

Originally Posted by Presto51

Hey Jim,

Looking over your prime videos and I noticed that It looks like your not using guide coat before you do any sanding?

Ron

---

Yes, I use a dry coat with everything when needed.

Dealing with the Factory Five 33 Hot Rod V2 Hood Fitment.


https://www.youtube.com/watch?v=xorFLXV00Ow&t=1s

Installing Door Lock Solenoids on the Factory Five 33 Hot Rod V2


https://www.youtube.com/watch?v=2ol5NGnCj24&t=2s

Test drive - Factory Five 33 Hot Rod V2


https://www.youtube.com/watch?v=l11peIEoWcU

Working out my custom reverse lights on the Factory Five 33 Hot Rod V2


https://www.youtube.com/watch?v=pySjRn_qJ1s&t=2s

Working out my custom reverse lights #2 on the Factory Five 33 Hot Rod V2


https://www.youtube.com/watch?v=cYbhoAbVgUs

Kit Car Talk #5 with Street Rod Jim - Factory Five 33 Hot Rod V2


https://www.youtube.com/watch?v=bzMv3gocUAQ

Fixing the leaks on the new Factory Five 33 Hot Rod V2 build


https://www.youtube.com/watch?v=gVgDVpuA8d0

Fixing a valve cover leak on the new Factory Five 33 Hot Rod V2 build


https://www.youtube.com/watch?v=aDnaILXI15Y

Dropping off the Factory Five 33 Hot Rod V2 for body work.


https://www.youtube.com/watch?v=Qobj81zqvzs