Can you give us the latest on when the seats and interior stitched parts may ship? Thanks.
R/s
Vidal
Printable View
Can you give us the latest on when the seats and interior stitched parts may ship? Thanks.
R/s
Vidal
In keeping with MY direction that the guys stay plugged in to customers on this forum, I spose I should be the one to answer this personally since I'm the one who made the original decision on the interiors. Plus, the guys are putting the rear diffuser on the car!
The short story is that Mark Dunsford from the UK (company making the interiors) emailed yesterday that we will have the parts in 7-10 days. If that sounds easy, it belies the history of this part, for which I will take personal responsibility for. The reason more folks havent complained is likely the fact that the interior is installed later in the build, so, unlike the transmission, it is not urgent.
When we pulled the wraps off our new 2nd Gen GTM last year at Open House, and went to production shortly afterwards, it was without the new interiors. We had a prototype set and yet estimates on getting the production parts in were 3-6 months (that would later turn out to be 8 months! ugh). To be fair to the guys here (EVERYONE) I felt very strongly that the new GTM HAD to have a hand-stitched interior upgrade and I was NOT willing to hold off the launch since everything else in-house was so ready (jigs, new molds, etc). Everyone was warning me that this could happen. The big delay came in the form of a dimensional change (mistake) where we had to go back and change the size of some dash parts that underlay the covering. These are injection molded parts and had it not been for that change, I would have been right.
Bottom line is that I made the call (like the mendeola transmissions) and those two items in the Gen 2 project were much longer than estimated. The car is better for it and when guys are driving their cars they will be gald they have the new parts, but the wait has been excruciating and I do apologize huge for that. We have about 25 guys waiting and I think, 50 sets on their way for next week.
Dave,
Thank you. I'm still getting use to "The President" personally comunicating to his customers. Confirming my disicision for the GTM over a some what similar choice. Keep doing what you do.
R/s
Vidal
Whoo-hoo!....does this mean I don't have to cut down the ends of the RH and LH dash pods anymore!? That would be very nice to hear!
Hi Guys,
I was just talking with Dave, the delivery time on his post is a little off, the parts are being finished and shipping w/in the next 7-10 days, we'll get accurate in house date for them and have a post up by Monay. We do have enough to cover all orders coming in, eveyone will get theirs...
thanks for everything..!!! :o
Patti :)
Patti
In addition to those who have been waiting, will you have units in stock for deliveries in May? Or do you need to batch order again with the wait?
Will the next wait be this long?
Thanks
Bob
Bob,
we'll have enough to cover orders for a couple of months, by that time the next batch will be here. you should be all set :)
thanks.!!
Patti,Quote:
Originally Posted by patti maloney
Good morning. Can you give us the latest on the parts? Thanks.
R/s
Vidal
Have you heard anything yet on this?
I heard the end of April for seats
From someone at the Factory?Quote:
Originally Posted by Joe Mush
Jason from FFR told me that
Any updates on the parts? Thanks.
R/s
Vidal
I think the 18th was the date to get some of the parts on their way from England. Do you (Factory Five Dudes) know if this happened? I getting close to painting, I was hoping to have seats in before I put the body back on.
Hi Guys,
the seats will be leaving England by Monday, they'll be here with in 4 weeks. The interiors will be leaving England 2 1/2 weeks following.
thanks.!!
Patti
You guys need to understand, FFR had no idea that all the seamstressers had to stop on our interiors to work on Kate Middleton's dress.
Thanks Patti for the update on the Gen 2 GTM interior. Do we know if the new Gen 2 GTM Diffuser spacers, etc have been shipped out?
Also, are we still tracking on the time frame Dave Smith outlined for the Mendeola Transaxles in Mid May?
Thanks,
Radkat
I am hoping to post dates this afternoon :)
I have two questions for the Factory Five guys.
I am just about to paint the body and should have it back on in about two weeks. Will I be able to install the dash and other parts we are still waiting on with the body on?
On the 20th we expected to seats to ship on the 24th. What is the word from England? Did they get out?
Thanks
Dave
I have two questions for the Factory Five guys.
I am just about to paint the body and should have it back on in about two weeks. Will I be able to install the dash and other parts we are still waiting on with the body on?
On the 20th we expected to seats to ship on the 24th. What is the word from England? Did they get out?
Thanks
Dave
Any words from England?
Only word is that William and Kate have yet to go on their Honeymoon.Quote:
Originally Posted by Nitetrain
Hi Guy,
the seats have left England and have an eta to Factory Five of 5/18 to 5/23
exact day is hard to narrow down with overseas containers. The first 25 interiors will be here app the same time. Everyone will get their seats and the first 25 guys will get their interiors, the rest of the interiors will be app 4 to 4 1/2 weeks later and everyone will be all set.
thanks.!! you guys are the best... :)
Patti
Patti,Quote:
Originally Posted by patti maloney
Thanks for the update. I do have a question. What are the 25 kit numbers for the first interior parts run? Really what I'm asking is kit#331 in that 25? Thanks.
R/s
Vidal
I was at the factory today. I physically saw the boxes and boxes of seats.
Where are the pictures? No pictures it didn't happened. Just kidding Gary. The good news is that they are not letting them sit there. I got an email about an hour ago with the tracking number for my seats. Keep up the good work guys a big thumbs up to all the crew at FFR.
You should see the pile of transaxles on the shelf!!!!!!!!!!
Man, wish that post was true! :-((((Quote:
Originally Posted by fact5racer
Gary,Quote:
Originally Posted by fact5racer
Did you see any interiors?
The interiors arrived TODAY!!!!!!!!!!!!!!!!!! I got rained out at work (Doing an outside shoot for "Nuns in Hot Leather 2" where I play Father Erection) so when I got an email from Patti I drove down. They were worth the wait! These parts are worlds better in quality than the Gen 1 stuff that I used to get reupholstered. I was gonna go with aluminum door panels on my KONI GTM but after seeing these I am gonna go ahead and use them.
Now you've gone and got me all excited! I won't see my seats until Thursday, and the interior until probably a week later. After your description, not certain I can wait. Any chance you can post a few pics?
-Michael
aluminum will look better in a race car!!!!!!!........i can find a home for the panels......Quote:
Originally Posted by fact5racer
Here's a shot of my new dash
Cool Gary! Thanks for the pictures.
Gary,
Thanks for the picture. Is the extra material at the rear of the center console there to cover the gap between it and the engine cover?
My seats arrive tomorrow and my interior arrives on Monday...!!!!!!!!!!!!!!!!!!
FedEx just delivered my seats. I will post low quality pictures in a few minutes and better quality tonight when I get home.
http://60quxa.bay.livefilestore.com/...at2.jpg?psid=1
http://60quxa.bay.livefilestore.com/...eat.jpg?psid=1
K,
Mine don't arrive until tomorrow. So I have a quick question. Do the bottom cushions pop out to ease the install or are the material one piece like the Gen1 Seat?
They are a one piece cover. The bottom cushion opens up but will not allow access for installation. I assume is to be able to replace the bottom foam. Here are better pictures.
http://pd12tw.bay.livefilestore.com/...862.JPG?psid=1
http://pd12tw.bay.livefilestore.com/...863.JPG?psid=1
http://pd12tw.bay.livefilestore.com/...864.JPG?psid=1
http://pd12tw.bay.livefilestore.com/...865.JPG?psid=1
http://pd12tw.bay.livefilestore.com/...866.JPG?psid=1
I just got my seats. They totally exceed expectations. Great Job Factory Five!
Thanks
Dave