Kooks Custom GTM Exhaust System --New Order Process! Ready to Take Orders!
Well, the last run of the Kooks Exhaust is complete (with the exception of the SL-C headers that are still being worked on.....) and I am ready to begin taking orders for the next run. Thanks to all of the guys who ordered last time!
We're going to start doing these orders differently than in the past. Before, Kooks would only build these GTM exhaust systems in batches of 10, so before I could turn in an order for the next batch, I needed to have 10 confirmed orders. This resulted in some orders taking up to 6+ months to fill. I've worked out a deal with Kooks to reduce the order/run quantity to 5. Out of those 5, most likely I'll be ordering one or two systems to keep in stock until they are sold......then start a new run of 5. So the end result will be in reality that we will only need 3 or 4 confirmed orders for each run, which should speed up the process considerably.
This system is all Stainless Steel, and includes long-tube headers (with O2 bungs welded in), cats, X-Pipe, mufflers, tips and mounting hardware, clamps, and brackets. The main advantages would be increased performance/hp in switching from the stock exhaust manifolds to a long-tube header/X-pipe design. A close second would be exhaust note. This system gives a much more exotic sound than the stock manifolds with the FFR provided H-pipe. Third would be that it's all Stainless Steel, so it doesn't need to be coated (like the FFR exhaust) if you don't want to, and it won't turn into a ball of rust. Yes, you can ceramic coat them if you like. Fourth......well it's just a sexy looking exhaust system!
Price for the whole system is $1893 plus shipping (which averaged around $60 for the last order) for all LS engines EXCEPT the LS7. For the LS7 the price is $2031 for the system plus shipping. This is due to additional work involved in the header flanges for the LS7.
Just to expand on this a bit, there is only one difference between the "standard" (LS1/LS3/LS6) headers and the LS7 headers, and that is the header flange port shape. The "standard" headers have round ports and the LS7 headers have D shaped ports. Both the "standard" and LS7 headers use 1-7/8" primaries into a 3" collector. The "standard" headers/system WILL fit and work on an LS7 with the difference in HP between running the LS7 headers and the "standard" headers being somewhere in the range of about 2 hp. So yes, if you have an LS7, and you'd be happy to trade the loss of 2hp for a gain of $138 in your pocket, just order the "standard" system for your LS7. This is also the reason that the systems I will be ordering to keep in stock will be "standard" systems and not LS7 systems.
If you just want to order the headers and not the complete exhaust system, you can do that also. Price for the "standard" headers (fits LS1, LS2, LS3, LS6) will be $1130 + shipping and the LS7 headers will be $1268 + shipping. Once again, the "standard" headers will fit and work on the LS7 also.
I can also offer the headers or complete system ceramic coated. Price for coating the headers only is $294, or the entire system for $650.
If you're interested in ordering, please send me a PM with your name, address, phone, email and engine type (LS1, LS3, LS7, etc), and I will put you on the list for the next run. As soon as I have the 3 or 4 orders on my list, I will contact everyone for payment and turn the order in to Kooks.
Here are some pics of what you get (that I stole from Ron!):
http://i78.photobucket.com/albums/j8...aders004-1.jpg
http://i78.photobucket.com/albums/j8.../Enginebay.jpg
And my very low-quality video clip . (Sorry) :rolleyes:
http://i78.photobucket.com/albums/j8...h_MOV01348.jpg
Please note that you will require a couple new spark plug wires to clear the headers on a couple of the cylinders. Here is what I've found that works:
Taylor custom makes them for Street and Performance in Arkansas. Part # TA-2326-BK (black) or BL (blue). Made for LS1/6 with 135degree boots.
A set is $102.95 plus shipping. Or if you want just one or two, they will sell them individually ($12.95 each). Talk to Mark at (479)394-5711.
Thanks!!
