Scorpion Roller Rockers 1.6 | 302 | Value Covers Fit?

Printable View

02-09-2021, 12:59 AM
Padawan

Scorpion Roller Rockers 1.6 | 302 | Value Covers Fit?

All,
Stock 302, AFR 165 Heads

What valve covers fit over Scorpion Roller 1.6 Rockers?

Rocker Arms, Stud Mount, Full Roller, Aluminum, 1.6 Ratio, 7/16 in. Stud, Ford, Small Block

Prefer the Power by Ford look

Thanks,
Matt
02-09-2021, 07:04 AM
GWL

Start with a search like: tall ford racing valve covers for 302

This is the page I came up with: https://www.google.com/search?rlz=1C...4dUDCA0&uact=5

Realize that your type of intake will matter too. Some tall valve covers will interfere with the stock Ford EFI intake. If you have a carb or carb like EFI it should not matter how tall they are.

George
02-09-2021, 07:14 AM
mburger

Just one source of 100s like George posted.

http://store.cobranda.com/28vaco.html
02-09-2021, 08:17 AM
Sdonnel

I used the standard cobra valve covers with the comp roller rockers. I also installed a 1/2" spacer under the valve cover. Just make sure you tighten them down and recheck them after a few heat cycles. I had no issues.

Scott

All times are GMT -5. The time now is 10:03 AM.

The representations expressed are the representations and opinions of the TheFactoryFiveForum.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Factory Five Racing, Inc. or Ford Motor Company.
This website has been planned and developed by TheFactoryFiveForum.com and its forum members and should not be construed as being endorsed by Factory Five Racing, Inc. or Ford Motor Company for any purpose.
"FFR", "Factory Five", "Factory Five Racing", and the Factory Five Racing logo are registered trademarks of Factory Five Racing, Inc.
TheFactoryFiveForum.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s).
Thank you for visiting the TheFactoryFiveForum.com.
Copyright 2011 Factory Five Racing, Inc. All rights reserved.
COBRA is a registered trademark of the Ford Motor Company. The Factory Five Forum is not connected to the holders of this mark.
The Factory Five Forum is not connected in any way to Carroll Shelby.