Custom & Turn-Key LCD Gauge Systems

The latest updates for 2021 are here, and Happy New Year while I have your attention! Let's all hope this year is better than last,
in every way possible.

New gauge designs, more functional skins available, and a new website to round off this post. The site is much easier to navigate,
and has more content to view.

https://www.LCDdash.com



Attachment 140357Attachment 140350Attachment 140351Attachment 140352Attachment 140353Attachment 140354Attachment 140355


This video illustrates some of the control capabilities of the 200 series system, using touch screen icons to switch on virtually any
device on your vehicle, or automated through pre-set logic based on your preferences.

https://www.youtube.com/watch?v=FKpYl8Ise3I
https://www.youtube.com/watch?v=FKpYl8Ise3I

A few cool projects on the horizon including an electric vehicle interface, and system design for a new boat company. We're going
to simplify this cluster into a very slick, less expensive, but cooler display!

Attachment 140349

PM me for more details, or ask right here. Thanks!

Any GM ECU support or Holley Terminator X?

Yes, there is GM ECU support. What year do you have in mind?

For Holley, I would need the data frame layout depending on which information is required.

Here are some updates since the last video post:

https://www.youtube.com/watch?v=frSrkSoYXE0

Attachment 146094

https://www.youtube.com/watch?v=IYg7K42Jz7M
Attachment 146095

Good day all, thanks for dropping in to read the latest updates.

We're moving in the right direction with an aluminum enclosure and harness, as opposed to 3D printed
housings. There is no difference in performance from the previous version, simply a hardware change.

Attachment 157928Attachment 157932

A more standardized kit will be launched with a dedicated skin to help expedite the build process. The skin
will offer variations for manufacturer logos and vehicle images.

Two versions will be available for those needing additional information.
6 to 8 Gauges: Tach, Speedometer, Voltmeter, Fuel Level, Temperature, Pressure, Pressure/Fluid Temp, Boost
Attachment 157931Attachment 157929Attachment 157930

Custom skins will still be offered for projects needing more OEM replicated clusters.
They can be found on the website at this link:

https://lcddash.com/product/graphic-skins/

I'll be hiring a tech to help assemble the systems are more orders are coming in. If you're in the Whitby, Ontario
area and have a background in Electronics feel free to reach out!

Here's the latest promo video to leave you with!

https://www.youtube.com/watch?v=iVcSHXGPlcs

Merry Christmas and Happy New Year everyone. Thanks to those that reached out, and let me make their vehicle
extra cool!

One more promo vid for the end of the year, and maybe a promise to finally work on my GTM in 2022?! :/

Enjoy the weekend,
Tino

https://youtu.be/-EdeegBtrXA

New Graphics & new hardware. CAN bus, OBD2, ECU hard-wired, or Carbureted engines - no problem.

Attachment 165243Attachment 165244Attachment 165246
Attachment 165245Attachment 165242

Some video links as well:

https://www.instagram.com/tv/CbkvcZy..._web_copy_link

https://www.instagram.com/tv/CbqdVlo..._web_copy_link

Your clusters look really cool. When we get closer to release of the F9 I might need to check your stuff out more seriously. Especially if you'd do custom graphics for the F9.

EDIT: You do custom sizes, too? I don't know what the interior of this will be at default, but I LOVE the setup Ford uses in the Dark Horse with the gauge cluster screen flat in front of the driver and the center console screen kind of "attached" to it but angled back at the driver and within arm's reach.

Hello Everyone,

I'd like to present a new product that we've launched, for those wanting to control their electrical systems,
and keep their mechanical gauges.

This is not an LCD system, but rather a Body Control Module to operate radiator fans, electric fuel pumps,
LED turn signals, and many more features!

Here's a link to a common thread, to keep the site tidy.
https://thefactoryfiveforum.com/show...l=1#post585944

Attachment 216353

Thank you for your interest,
Tino
info@LCDdash.com

Bluetooth audio & control capability now available for all LCD systems!


Also noteworthy, our new enclosures are moving away from PLA+ printing,
to anodized aluminum. The units have integrated processors, and/or relay
modules for less wiring, less space, and less overall weight.


Much more info and images here:


https://thefactoryfiveforum.com/show...l=1#post598690

Attachment 223161