302 Engine Build - Cylinder Heads | Intake Manifold | Stack-able EFI -- Advice Needed

Printable View

08-16-2020, 07:07 PM
Padawan

302 Engine Build - Cylinder Heads | Intake Manifold | Stack-able EFI -- Advice Needed

Good Evening,
I've ordered a 302 short block with an E303 Cam and looking for advice on what Cylinder Heads | Intake Manifold | Stack-able EFI I should get...

Quick Background: This Roadster is being built as a cruiser, no racing of any kind..

Cylinder Heads?

Intake manifold?

Thinking about: HOLLEY SNIPER STEALTH 4150 with an Intank Fuel Pump?
https://www.holley.com/products/fuel.../parts/550-870

Thanks in advance...

302 Short Block Parts:
Pistons: Federal Mogul
Rings: Hasting
Rods: FORM OEM
Rod Bearings: Federal Mogul
Main Bearings: Federal Mogul
Cam Bearings: Melling
Ear Main Seal: Fel Pro
Gaskets: Fel Pro

Roadster Setup:
IRS
Wilwood Pedal Box
Power Steering - OEM Mustang Rack
Power Brakes w/ https://www.whitbymotorcars.com/prod...-kit-complete/
-Rear Brakes | FFR solution because I'm going with 15 inch rims
-Front Brakes | Mustang OEM
Fuel Tank | Mustang OEM
Intank Fuel Pump | TBD
15 inch Rims
T5 Transmission
302 Engine
08-16-2020, 08:27 PM
Sdonnel

I had the AFR165’s on a 306. They were a very nice upgrade that really moved some air. They’re not cheap, but you don’t have to overhaul brand new heads like some of the other offerings out there.

Scott
08-16-2020, 09:19 PM
Padawan

Scott,

Is this what you're referring to: https://www.summitracing.com/parts/afr-1402 ?
08-17-2020, 12:19 AM
TMartinLVNV

I have the Edelbrock E-Street heads and Air Gap intake with the Holley Sniper. I also have the Ford "E" cam. with my 347, it puts out 439 hp and 445 ft lbs. Not too shabby.

All times are GMT -5. The time now is 10:04 AM.

The representations expressed are the representations and opinions of the TheFactoryFiveForum.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Factory Five Racing, Inc. or Ford Motor Company.
This website has been planned and developed by TheFactoryFiveForum.com and its forum members and should not be construed as being endorsed by Factory Five Racing, Inc. or Ford Motor Company for any purpose.
"FFR", "Factory Five", "Factory Five Racing", and the Factory Five Racing logo are registered trademarks of Factory Five Racing, Inc.
TheFactoryFiveForum.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s).
Thank you for visiting the TheFactoryFiveForum.com.
Copyright 2011 Factory Five Racing, Inc. All rights reserved.
COBRA is a registered trademark of the Ford Motor Company. The Factory Five Forum is not connected to the holders of this mark.
The Factory Five Forum is not connected in any way to Carroll Shelby.