Engine build update
by , 04-22-2012 at 08:28 PM (2003 Views)
My engine almost done, still missing some parts or have the parts but it doesn't fir and I need to exchange it.
I really enjoying this engine build experience and my buddy suggested that get a used T5 transmission and rebuild it. Which sounds like great idea to me, in that case, every single bolt in the car will be tuned by me:) and I'm sure I will learn a lot about manual transmissions.
So while I'm shopping for the transmission, here are some pictures of the engine that comes together nicely.
Ford racing F cam, timing gear and cylinder heads, with new Trick Flow springs set installed.
[ATTACH]8947[/ATTACH]
Timing cover, high flow water pump and brackets installed. Alternator bracket will be replaced, due to set up issue with power steering pump bracket.
[ATTACH=CONFIG]8948[/ATTACH]
Restored oil pan in place
[ATTACH=CONFIG]8949[/ATTACH]
Lower intake manifold and exhaust manifold bolted in
[ATTACH=CONFIG]8950[/ATTACH][ATTACH=CONFIG]8951[/ATTACH]




Email Blog Entry
