Forte's

Visit our community sponsor

View RSS Feed

ZwickFF

Mark 2 Roadster heater/defroster

Rate this Entry
1 Comment
by
ZwickFF
, 08-27-2011 at 05:48 AM (1772 Views)
[QUOTE=ZwickFF;30999]Just bought a beautiful Mark 2 roadster #2098 originally purchased on 2000. Heater doesn't seem to work. 3 speed fan works fine. Heater temp switch is the same 4 position swith as the fan with only 2 wires hooked up. Not sure how that would control temp. Looking for specs and wiring diagram for the Mark 2 heater.[/QUOTE]
Tags: None Add / Edit Tags
Categories
Uncategorized

Comments

  1. mikesmk3.1's Avatar
    The two wires go to Vacuum solenoid valves. The heater door is vacuum operated. There should be a vacuum valve in the heater hose going to the core. The heater is a Vintage Air try this link to the instructions and drawing.
    [url]http://www.vintageair.com/DownloadsSection/Heater%20Systems/50515-VUH%20CompacHeater%20(Inet).pdf[/url]
    Might not be the correct one but you can
    find it at their web site
    Updated 08-31-2011 at 07:28 PM by mikesmk3.1

FFMetal

Visit our community sponsor