Visit our community sponsor
Since my last post I was able to drop the engine in, install lakewood steel bellhousing, flywheel, clutch and trasmission Here are couple pictures: engine is going in [ATTACH=CONFIG]9899[/ATTACH] I wanted to install all parts in the car, so I will know in the future how easy/hard is to get to the clutch if I need to [ATTACH=CONFIG]9900[/ATTACH] starter installed [ATTACH=CONFIG]9901[/ATTACH] Now I'm working ...
I'm getting closer to the point when I will have to drop engine in. But before that I wanted to finish my heater/fresh air enclosure. First of all, I had to install coolant supply and return valves. [ATTACH=CONFIG]9537[/ATTACH] Then drilled holes and install rubber grommets and air supply duct connection. [ATTACH]9540[/ATTACH][ATTACH]9541[/ATTACH] Then it was time to run the wires and install the box [ATTACH]9542[/ATTACH][ATTACH=CONFIG]9543[/ATTACH][ATTACH=CONFIG]9544[/ATTACH] ...