Rat Eater Build
Drivetrain is in
by , 05-24-2012 at 10:19 AM (1505 Views)
Since my last post I was able to drop the engine in, install lakewood steel bellhousing, flywheel, clutch and trasmission
Here are couple pictures:
engine is going in
[ATTACH=CONFIG]9899[/ATTACH]
I wanted to install all parts in the car, so I will know in the future how easy/hard is to get to the clutch if I need to
[ATTACH=CONFIG]9900[/ATTACH]
starter installed
[ATTACH=CONFIG]9901[/ATTACH]
Now I'm working on engine wiring. Getting close to the point when I will try to turn that key:)
Here is the latest picture.
[ATTACH=CONFIG]9902[/ATTACH]
I wanted to install the ignition coil as close as possible to the distributor, so had to make custom bracket for it, to install on cylinder head. Also, made battery cage to mount it in the front for the car. My buddy did a great job powder coating it
[ATTACH=CONFIG]9903[/ATTACH]
Tags:
None
- Categories
- Uncategorized
Email Blog Entry
Go to Profile
Mark as Read
