Rat Eater Build
behind the dash
by , 02-06-2012 at 10:22 PM (1796 Views)
It's been a while since my last post. A lot to do, not much to show, that's how it goes with the wiring. Since my last post I was able install the shelf underneath the dash, run all the wires for my switches, install front speakers and heater vents, 12v power outlet as well as 3.5mm jack for my portable mp3 player.
[ATTACH=CONFIG]7777[/ATTACH][ATTACH=CONFIG]7778[/ATTACH][ATTACH=CONFIG]7779[/ATTACH]
I need to get label maker, even couple days later when I look at the wiring it takes me 20min to figure out what is what, don't want to do that couple years later:)
[ATTACH=CONFIG]7780[/ATTACH]
Also I build battery box to mount in the front of the vehicle, ran all battery cables to battery kill switch and now waiting while the battery box being powder coated. Once that is done I will install battery and check my wiring, hopefully everything works as I anticipated.
[ATTACH=CONFIG]7783[/ATTACH][ATTACH=CONFIG]7784[/ATTACH]
I want to finish my dash wiring before I get my 302 engine block from machine shop, so I could install 331 rotation assembly. That will be one fun project:)
Tags:
None
- Categories
- Uncategorized
Email Blog Entry
Go to Profile
Mark as Read
