SirAustin
Brake lines run, electical started.
by , 01-21-2012 at 05:09 PM (1618 Views)
Last Sunday I had my friend RJ come over and he helped run the brake lines for me. He had a nice Snap-On flaring tool which made for a real clean install. I am using a hydraulic clutch so I used the existing hole for the clutch cable to run the lines out and down the frame. Turned out pretty nice, if I were to do it again I would of used fittings to go threw the firewall for a even cleaner install but it turned out great.
Had some issues with the rear brakes, I get to drain my rear end pull the axels and then flip my brake brackets around so the brakes are mounted on the front. After that is done I will have my brakes completed.
I started running the electrical today, boy oh boy that little hole they want you to run a bunch of wires threw is crazy might enlarge that and put a grommet in it.
Pretty excited on how fast my build is going. My motor will be done by next month!! Need a transmition, clutch, and bell housing still, also have not run my fuel lines yet. I am still waiting to see if Boyde Welding comes out with a shorter tank if so I will be using that with -8 lines.
To everyone who is blogging keep up the posts I love reading how everyone else is doing!
Tags:
None
- Categories
- Uncategorized
Email Blog Entry
Go to Profile
Mark as Read
