RyanH
IRS - Knuckles
by , 02-15-2010 at 12:03 AM (848 Views)
This marks a sort of transition in the blog.
I started out with a website with dates and time spent and costs and all that and just got behind.
Im breaking from that model now that Ive moved everything onto this website and Im just sort of playing catchup.
So, IRS Knuckles.
Mine were in pretty good shape. Covered in dust, but not bad. Of course the knuckles are aluminum so they cant rust.
The worst part of the cleanup by far was getting the bolt that held the dust shields on. Who ever installed them used about half a tube of thread lock on each bolt.
[IMG]http://i202.photobucket.com/albums/aa102/RyanFromVegas/Roadster/IRS/IMAG0132.jpg[/IMG]
[IMG]http://i202.photobucket.com/albums/aa102/RyanFromVegas/Roadster/IRS/IMAG0133.jpg[/IMG]
[IMG]http://i202.photobucket.com/albums/aa102/RyanFromVegas/Roadster/IRS/IMAG0141.jpg[/IMG]
And Here one is finished and installed. I had the hubs re-drilled by Stu.
I also installed new poly bushings
[IMG]http://i202.photobucket.com/albums/aa102/RyanFromVegas/Roadster/IRS/IMAG0165.jpg[/IMG]
Email Blog Entry
Go to Profile
Mark as Read
