Rat Eater Build
Firewall with heater installed
by , 11-13-2011 at 08:31 PM (1020 Views)
This morning I decided to tackled nice little project- install firewall with Summit racing heater.
[ATTACH=CONFIG]6088[/ATTACH]
This little guy pushes 28,000 BTU, which high for it's size. FFR guys are happy who installed in so I decided to get it, because it's much easier install it right now, than when firewall is riveted in.
So, I made a template on regular paper, then transferred to cardboard and then to firewall while it's attached to the frame with clekos, just to make sure it will fit.
[ATTACH=CONFIG]6089[/ATTACH][ATTACH=CONFIG]6090[/ATTACH][ATTACH=CONFIG]6091[/ATTACH]
After playing with sheet metal tools for little bit I was able to all opening for the heater. I had to take my time and pay more attention to details little bit more than I did when I worked for HVAC company:) I knew I couldn't take another firewall if I make a mistake on the first one.
I was happy when at the end, when I saw that everything lined up correctly.
[ATTACH=CONFIG]6092[/ATTACH][ATTACH=CONFIG]6093[/ATTACH]
Tags:
None
- Categories
- Uncategorized
Email Blog Entry
Go to Profile
Mark as Read
