SirAustin
Overdue for an update.
by , 11-02-2011 at 02:40 PM (1275 Views)
Just realized I have been putting off updating my blog for a while!
My father and I have come a long ways on the build at least I think we have!
The rear end is installed. A good friend was super awesome enough to paint it in his paint booth for me.
[ATTACH=CONFIG]5730[/ATTACH]
This bolt not lining up was very frustrating, helpful hint make sure everything is lined up and check your height.
[ATTACH=CONFIG]5731[/ATTACH]
Pedal box assembled and installed.
The tabs on the bracket that you drill threw into the frame were off a bit but clever use of vice grips to force them over helped fix that problem.
[ATTACH]5732[/ATTACH]
Also note that the clutch has been switched for a hydraulic clutch. Call Steve at Fortes and he can set you up with a master cylinder.
[ATTACH]5733[/ATTACH]
Steering Shaft installed.
After talking to I think it was Dan at Factory Five who was super helpful I decided that my tight fitting steering shaft will stay. I did learn not to pound it in too far!! I missed the part where it said just passed the second spring washer. So I had to back mine out wasn’t easy but was done.
[ATTACH=CONFIG]5734[/ATTACH]
Gas Tank Installed.
This was actually a pretty fun part. The straps sure are a tight fit but we got them in there!
[ATTACH=CONFIG]5735[/ATTACH]
And now my father and I are having a blast installing the foot boxes.
Tags:
None
- Categories
- Uncategorized
Email Blog Entry
Go to Profile
Mark as Read
