Cutter 54
Mustang PBR front brake bolt question
by , 07-04-2021 at 11:18 AM (411 Views)
I have a Mk 4 with Mustang PBR brakes. I have mixed up some hardware and am unsure about the 4 bolts needed to attach the FRONT CALIPERS TO THE SPINDLES.
I suspect they are the black M 12 X 1.75 bolts with hexagonal heads and dried red thread locker on the threads. They are 1.5 inches long.
Also, PLEASE CONFIRM CORRECT TORQUE. The manual mentions 95 lb ft., but I searched the bolt torque table in the back of the manual and M 12 x 1.75 are listed at 61 lb ft. Please confirm both specifications.
I have witnessed some errors lately by FFR sending incorrect parts, so I hesitate consulting with them. I refuse to have any doubt about mounting, torquing or assembling any critical hardware on this beast. Thank you.
Tags:
bolt torque,
front brakes,
hardware,
suspension
- Categories
- Uncategorized
Email Blog Entry
Go to Profile
Mark as Read
