Jethrow
05-06-2013, 09:33 AM
Hi everyone,
I am trying to trouble shoot some wiring but it seems I have an issue with no power available from the gauge feed source. I see where the brown ACC feed comes to the fuse panel and I do have 12V there, but then if I check where the 12V for the gauge feed comes from the panel I have nothing. I am a bit unsure how the power gets from the ACC brown wire to the gauge feed brown wire.
And of course it is all a bit hard to see as the fuse panel is mounted and the harness wired in!
Can anyone help with this? A great clear photo of the wire side of the panel could help, along with some info (or a schematic) of how the wires actually run around the fuse panel.
Thank you
I am trying to trouble shoot some wiring but it seems I have an issue with no power available from the gauge feed source. I see where the brown ACC feed comes to the fuse panel and I do have 12V there, but then if I check where the 12V for the gauge feed comes from the panel I have nothing. I am a bit unsure how the power gets from the ACC brown wire to the gauge feed brown wire.
And of course it is all a bit hard to see as the fuse panel is mounted and the harness wired in!
Can anyone help with this? A great clear photo of the wire side of the panel could help, along with some info (or a schematic) of how the wires actually run around the fuse panel.
Thank you