Drivers Side Footbox - Front Panel

[hrosenthal]

Regarding the drivers side footbox front panel.
There is one that was screwed on to the frame upon delivery and another packed in one of the boxes.
There is no direction on which is the correct one to use, however, the manual shows the one that was packed, rather than the one that was originally screwed on.
17436
Thanks

[carlewms]

I have the Wilwood Pedal Box and you use the one sent in the box for the DS footbox front panel.

[Dave Howard]

Use the one on the right in your picture. Other wise you'll have to drill out a hole for the clutch cable and fill in cut outs designed for a mustang pedal set up.
My bad on my project!!!!

[edwardb]

What they said. Depends on the pedal box you're using. Which one? And what clutch setup? Cable or hydraulic?

[Jeff Kleiner]

http://thefactoryfiveforum.com/attachment.php?attachmentid=17436&d=1367638188

The panel on the left is used with a Mustang pedal box; the one on the right is used with the Wilwood box and cable operated clutch.

Jeff

[hrosenthal]

Great. Very helpful. Thanks.

[cobratech]

at the same point in my project attached panel on left will be changing out today to one on right wish i caught this post earlier ! thanks for posting

[bill3422]

In the manual pages #5 & 6 describe the use of each panel