How to connect : Ron Francis Clutch Safety Switch (Blue Wires) to Donor Clutch Pedal

[jakester888]

Using donor parts from a 93 Fox. I have harvested the clutch safety switch and connectors from the donor and using the Ron Francis wiring. There are light-blue wires labeled, "Clutch Safety Switch". My question is : how do I wire these into the donor clutch switch?

Connect to black or grey or straddle black & grey.

I do not plan to install a safety cut-off... just going with clutch safety switch.

Pic follows:

17190

Thanks,

[michael everson]

Pretty sure you can connect to either plug. Just not both. Do a continuity test to be sure. You should have continuity with the pedal pressed to the floor.

[jakester888]

I bought an ohm-meter and checked - you are right. I went with the black connector on the blue wires. Thanks!

17192