Mad Dog
02-18-2013, 01:08 PM
https://www.factoryfive.com/wp-content/uploads/2013/02/DSC_1269.jpg
The 2013 Factory Five Winter Open House was held this past Saturday and a few hundred attendees stopped by to take a look around the showroom, go for a plant tour, and grab a slice of pizza. Snow was in the forecast and some folks mentioned it had already started to fall in their town, so we didn’t have any Snowmen driving their Roadster, Coupe, Hot Rod or GTM to the event.
https://www.factoryfive.com/wp-content/uploads/2013/02/DSC_1253.jpg
The guys that started it all – Customers Joe L. and Paul G. kick started the Winter Open House event with the original Moochfest back in 2003. Here, they take a photo with Dave Smith, his daughter Nicole, and Factory Five’s Sandra D. as they pay a little bit back, picking up some Factory Five swag for a dollar.
The big hit this year was the 818R and 818 chassis on display in the showroom. Factory Five President Dave Smith gave a brief update on the project saying how development continues to stay on schedule. He also went on to discuss some of the updates that have been made to the building, such as the new laser cutter in welding department before heading out on a factory tour.
https://www.factoryfive.com/wp-content/uploads/2013/02/DSC_1316.jpg
And of course, what would a Factory Five Winter Open House be without some pizza, served just as the factory tour came to an end.
https://www.factoryfive.com/wp-content/uploads/2013/02/DSC_1365.jpg
The 2013 Factory Five Winter Open House continued the tradition started 10 years ago. Thanks to everyone who came and made this event a lot of fun. We look forward to doing it again next year!
https://www.factoryfive.com/wp-content/uploads/2013/02/DSC_1257.jpg
Above & Below: The new Factory Five has been kid tested, father approved.
https://www.factoryfive.com/wp-content/uploads/2013/02/DSC_1259.jpg
https://www.factoryfive.com/wp-content/uploads/2013/02/DSC_1267.jpg
Factory Five customer Rob B. tries the 818 chassis on for size.
The 2013 Factory Five Winter Open House was held this past Saturday and a few hundred attendees stopped by to take a look around the showroom, go for a plant tour, and grab a slice of pizza. Snow was in the forecast and some folks mentioned it had already started to fall in their town, so we didn’t have any Snowmen driving their Roadster, Coupe, Hot Rod or GTM to the event.
https://www.factoryfive.com/wp-content/uploads/2013/02/DSC_1253.jpg
The guys that started it all – Customers Joe L. and Paul G. kick started the Winter Open House event with the original Moochfest back in 2003. Here, they take a photo with Dave Smith, his daughter Nicole, and Factory Five’s Sandra D. as they pay a little bit back, picking up some Factory Five swag for a dollar.
The big hit this year was the 818R and 818 chassis on display in the showroom. Factory Five President Dave Smith gave a brief update on the project saying how development continues to stay on schedule. He also went on to discuss some of the updates that have been made to the building, such as the new laser cutter in welding department before heading out on a factory tour.
https://www.factoryfive.com/wp-content/uploads/2013/02/DSC_1316.jpg
And of course, what would a Factory Five Winter Open House be without some pizza, served just as the factory tour came to an end.
https://www.factoryfive.com/wp-content/uploads/2013/02/DSC_1365.jpg
The 2013 Factory Five Winter Open House continued the tradition started 10 years ago. Thanks to everyone who came and made this event a lot of fun. We look forward to doing it again next year!
https://www.factoryfive.com/wp-content/uploads/2013/02/DSC_1257.jpg
Above & Below: The new Factory Five has been kid tested, father approved.
https://www.factoryfive.com/wp-content/uploads/2013/02/DSC_1259.jpg
https://www.factoryfive.com/wp-content/uploads/2013/02/DSC_1267.jpg
Factory Five customer Rob B. tries the 818 chassis on for size.