View Full Version : One more new pic!
fateo66
02-13-2013, 02:14 PM
Here in one more new pic that FFR posted up today on facebook
15416
Also on a side note here is a link to the Grassroots video on the 818 which I don't recall ever seeing on here.
http://www.youtube.com/watch?v=9dw7BBZAU6M
Mechie3
02-13-2013, 02:21 PM
Lol @ the engine/trans just hanging out on the floor.
narkosys
02-13-2013, 03:37 PM
I noticed the gas cap on the fender.
P
fateo66
02-13-2013, 06:52 PM
15421
flytosail
02-13-2013, 10:21 PM
Does it appear that it is not set up for a wing on the S version?
wallace18
02-14-2013, 05:53 AM
Boy! I wish they would route the exhaust thru the body out the back, instead of the 2 pipes underneath on one side.
Does it appear that it is not set up for a wing on the S version?
Doesn't look like it, but I'm going to ask for that as an option when I out my final order in. Can't imagine it would be too difficult.
Wayne Presley
02-14-2013, 12:51 PM
From what I understand, the street car exhaust is not finalized and subject to change in the future but doing any number of custom exhausts would be really easy.
Mechie3
02-14-2013, 01:20 PM
Doesn't look like it, but I'm going to ask for that as an option when I out my final order in. Can't imagine it would be too difficult.
From the looks of the R, it requires extra frame members to be welded on.
From the looks of the R, it requires extra frame members to be welded on.
Yes, but again I can't imagine that would be that difficult to have as an option at order. We'll see.
flytosail
02-14-2013, 04:25 PM
That is what I thought. Good question for this weekend.
AZPete
02-14-2013, 11:41 PM
Quick, somebody look for Jim! He got in the go-kart in the Grassroots video and was in the passenger seat when it left the building, but in the parking lot his seat is empty. He should have buckled the seatbelt! I hope he's okay!! We REALLY need him.
Wayne Presley
02-15-2013, 10:03 AM
From the looks of the R, it requires extra frame members to be welded on.
From what I remember, the wing mounts were bolted into the frame. Remember this car is a prototype and subject to change/revision as it heads into production.
Mechie3
02-15-2013, 11:11 AM
From what I remember, the wing mounts were bolted into the frame. Remember this car is a prototype and subject to change/revision as it heads into production.
Oooh! Bolt in. I like that. If it's like that for production, it makes it easier to have as an option vs needing to custom weld frames (assuming the S doesn't have wing provisions to start with).
riptide motorsport
02-15-2013, 09:11 PM
It does look like it does get up and goes in the video, scootin right along.