painless brake wiring help

[dualstroke]

Hello guys,New guy here with a few questions.Hoping someone can help me out with the fun wiring job.We are building a roadster with a Russ Thompson column and painless wiring kit.I have got most all the wiring done but have a 3 wires I can't quite find a home for. I have a #959 headlight switch power B+(theres a #928 marked the same that I see in the diagram),a #918 turn switch to brake switch,a #907 dimmer switch to headlight switch.I have included the diagrams I am using and both are practically the same.The color one is better for me as in has painless wiring numbers on it.Please help.I appreciate any and all help.Thanks

[lilnuke]

918 (White) + Power to your brake switch. See page 27 of your Painless manual

I will have to go home and check how I wired the headlight switch with wires 907 (Blu/Ylw) & 959 (Orn). The color diagram you have is what I used and it is good. Also look for the headlight switch diagram from FFR if you are using their switch, it will describe all of the connections.

Took a look here at the house. If you have the FFR headlight switch drawing, I attached 907 to pin #6 and 959 to pin #5