For those who installed a 2005+ Mustang trans, how did you hookup the TO bearing?

[David]

For those installing the 2005+Mustang trans, how did you hookup the hydraulic TO bearing? Its got a bit of an odd looking connector on it, but not sure mine is complete. Any tips would be appreciated.

David

[ClemsonS197]

David,

Check out this post:

http://thefactoryfiveforum.com/showthread.php?7850-Installing-a-2005-2009-T3650-with-a-Coyote

The line I used is this:

http://www.summitracing.com/parts/MCL-139251/

http://di34.shoppingshadow.com/images/di/63/4a/4d/695169414b7a30393466725f4c326f45633477-450x450-0-0.jpg

This has the fitting you need to go into the trans. It's AN-4 on both ends so you should be able to ditch the clutch side and use an AN-4 fitting or adapter on the Wilwood pedals. There is a small "U" shaped piece of metal that locks this fitting to the piece on the trans. My local Ford would not sell me that small piece, and I had to get a salvage yard to get one for me.