Pedal Box hyraulic clutch

[eoinjohn]

Hi,
I'm wondering if I could get help with my Wilwood pedal box which I'm about to install, I have instructions for its installation with a cable but intend to install a hydraulic clutch. Is there anyone with some photos or advice.
Eoin

[edwardb]

Since the Wilwood pedal box is designed to use a master cylinder/hydraulic clutch setup, the standard Wilwood instructions cover it very well. Mike Forte can help with providing the right size master cylinder and slave cylinder setup depending on the your transmission/bell housing setup. Here's a picture of mine, if it helps:

http://i867.photobucket.com/albums/ab234/edwardb123/Factory%20Five%20Mark%204%20Roadster%20Build/Update%2011212012/IMG_1877.jpg

[eoinjohn]

Thanks for the info