LS3 installation into a 33'

[CQ hotroder]

Hi,

Im looking to install an LS3 engine into my 33' and have recently read in the forum that FFR have an installation guide for this. I'm also looking to run the standard air conditioning pump and alternator which are currently located low on each side of the engine. Can you please email me the installation guide if available (tracep@rkfes.com) and provide any advice regarding the a/c pump and alternator.

Regards,

Paul Trace

[Joe Scott]

Hey Paul, check your email. you will find the install guide for an LS in the hot rod.

Joe @FFRtech

[TigerBill]

I got the LS install guide from Dan. Thanks. ANother question though. The only accessory I plan on using is an alternator. Can you give some guidance on what brackets, iders, belt I shoulduse and where to get them. I can't find much on the internet that doesn't also include AC and PS. Thanks.

[Tony Zullo]

Hi Paul tony @ffr saw the message you can use only the alternator at the bottom driver side you are going to need to fab a bracket very easy when you look at it!!