Fitting FFR front bumper and hoop

[Gumball]

Here is a pic of 7074 with it's FFR stainless bumpers and hoop. Fit pretty good out of the box, but I'm going to shorten the spacers and bolts to pull it in a little closer to the body (especially at the bottom as that is farther out than the top) and to equal out the distance from the body side to side (the pass side is a little further away than the driver's side).

I was very pleasantly surprised at the quality and fit of these parts out of the box... FFR did these right.

http://i845.photobucket.com/albums/ab15/CCRsAC/FrontBumperFittingClose-up_zpsd65546e7.jpg

[bill3422]

Look really good, I am looking forward to the same

[SCFFR]

Great job Chris.
I actually had a problem getting mine fitted. Even with my over riders pushes as far out as possible, there wasn't enough space to get the hoop between them. After posting on the forum, one member suggested mounting the hoop to the over riders first and then install on the car.................which worked great. I'm using the body grommets and larger spacers from Finish Line which give me a little more space to play with.
You are definitely making good progress.
Ron