PDA

View Full Version : Electrical - Gas tank



racephotoman
11-25-2012, 05:27 PM
Just started laying out the electrial harness...ran the lines to the locations, including the gas tank plug(s), but see there are two plugs (one red and one gray), but only one connector on the tank. Does anyone know which one to use? And what do you do with the other-not wanting any electrical connectors exposed epecially around the "gas" area?

Walter

michael everson
11-25-2012, 05:39 PM
Sounds like you might have a carbureted engine? No pump in the tank? The two connectors look the same but they are not interchangeable. Try them both.
Mike

racephotoman
11-25-2012, 05:45 PM
No engine yet, but yes, carburetor.
Walter

Mike6568
11-25-2012, 05:55 PM
I have a carbureted engine as well and have the gray plug connected to the fuel level sender. The red plug, I believe is for an electric fuel pump...I didn't use the red plug as I'm using a mechanical fuel pump...


Just started laying out the electrial harness...ran the lines to the locations, including the gas tank plug(s), but see there are two plugs (one red and one gray), but only one connector on the tank. Does anyone know which one to use? And what do you do with the other-not wanting any electrical connectors exposed epecially around the "gas" area?

Walter