MK II front alignment settings

[mikeinatlanta]

Anyone have a baseline for MKII front with the Borden/Whitby SAI kit? Looking for a basic track setup baseline.
Thanks,
Mike

[CraigS]

Camber should be 2.0 to 2.5 negative. Toein can be from 1/16 total toeIN to maybe 1/8 toeOUT. The guys w/ more track experience can comment on how much toeout better than I can. Caster depends on steering setup. Manual between 3-5 deg. positive. Power steering between 4-9 deg positive. Be aware that if you want more than 'about' 5 deg caster you will need longer front sleaves for the upper control arm so you don't run out of safe thread engagement. HTH

[mikeinatlanta]

Thanks. I had Levy's high roll center setup installed but couldn't get over the ball joint binding isssues. Bought some of the SAI brackets years ago but never installed them. Now all binding issues are good.