Radiator mounting

[jkrueger]

I got the engine in yesterday and now I am trying to mount the radiator. From what I read I should wait to do the aluminum ducting until I get the hood on. Can I mount the radiator now so it would be secure for go-karting? My only issue is what angle it should be at. There is a lot of play in the bottom mounts. Should I just center it and bolt it there? I may have to lower it latter since my top mount strap sits about 3/4" off of the 1x1 square tube.

Thanks
JC

[willy]

I just centered it, as for the strap do not forget to use some pading in between the strap and Rad I used some of the wether striping in the kit, I have a gap to so I just snugged it up have about a 1/4" gap both sides when done.