View Full Version : Breeze dead pedal : how did you mount this?
jakester888
10-27-2012, 09:22 AM
Hey guys. I bought the Breeze pedal setup. Looks nice but I am not sure how to mount the dead pedal. The bracket on the side doesn't seem to work.
Any ideas?
12561 12560
jlfernan
10-27-2012, 09:35 AM
You can try mounting a piece of aluminum like I used for my dead peal, then attach the Breeze pedal to it.
http://img221.imageshack.us/img221/9200/dscf3071x.jpg
http://img193.imageshack.us/img193/2561/jorgec.jpg (http://thefactoryfiveforum.com/private.php?do=newpm&u=111)
Rootbeer Roadster
10-27-2012, 01:02 PM
I'm not sure, but it looks like it was designed to be mounting directly to the sheet metal panel (left side) that you haven't installed yet.
You can try mounting a piece of aluminum like I used for my dead peal, then attach the Breeze pedal to it.
http://img221.imageshack.us/img221/9200/dscf3071x.jpg
http://img193.imageshack.us/img193/2561/jorgec.jpg (http://thefactoryfiveforum.com/private.php?do=newpm&u=111)
I did the same thing, it works great. I painted it black and put some non slip tape on it.
MPTech
10-27-2012, 08:59 PM
x2 Rootbeer Roadster
I mounted mine on the FB aluminum panel, set back from the clutch and brake just slightly. I really like it and it matches my clutch, brake, and gas pedals.
efnfast
10-27-2012, 10:04 PM
I think it's supposed to mount on the aluminum panel. My DWC pedal mounts that way and this looks similar
skullandbones
10-27-2012, 11:48 PM
I was just looking at this mod. Very simple yet effective solution. Wish they were all that good! Thanks again jakester for the thread and jlfernan for the pic.
WEK.
McObra
10-28-2012, 12:14 AM
According to the Breeze website, the dead pedal is intended to mount to the drivers footbox wall with 4 screws.
rich grsc
10-28-2012, 08:39 AM
When in doubt, read the directions.
Svtjackal
10-28-2012, 06:35 PM
It mounts to the FB aluminum, I used a big tick piece of stainless steel on the outside of the foot box and the pedal bracket mounted it through from the inside with a couple of grade 8 bolts, mounting it directly to the FB aluminum seem kind of flimsy but with the steel outside, it feels pretty solid
MPTech
10-28-2012, 09:44 PM
the dead pedal is intended to mount to the drivers footbox wall with 4 screws.
4 screws? Mine came with 2 bolts and nuts to secure it to the DS FB outside aluminum panel. (there are also 2 bolts / nuts to attach the pedal to the bracket).
Svtjackal
10-28-2012, 10:35 PM
4 screws? Mine came with 2 bolts and nuts to secure it to the DS FB outside aluminum panel. (there are also 2 bolts / nuts to attach the pedal to the bracket).
The new ones are bigger and they mount with 4 bolts to the footbox aluminum
12618
jakester888
10-30-2012, 07:10 PM
When in doubt, read the directions.
Directions, we don't need no frickin' directions.
:p