Rear Spindle space - parking brake bracket

[racephotoman]

Is there a parking brake bracket that mounts to the rear spindles?

Also, while attaching the rear spindles to the lower control arm, the fork space was too wide. Originally, I thought just to tihghten the bolt/nut, but this just bend one side of the forks in (forks are now not parallel)...so I decided to use one of the spacers used for the opposite end of the lower control arm (seem to work perfectly)...basically what I'm asking, this is OK to do since the instructions don't meantion any of this?

Walter

[CHOTIS BILL]

I have machined some E brake cable mounting brackets for my IRS uprights using the Wilwood parking brake from 6061-T6 aluminum plate. I ran off a few extra and I would consider selling a pair for $50 plus shipping which would include a return spring to stop the E brake from dragging. If interested e-mail me at: blomenick@deltatau dot com
and I will send you some pictures or I can be reached at 818.171.5694

Bill Lomenick